Servo-Hydraulic Compression Testing Machine 2000kN concrete
compression test HCT206A
This series of compression testing machine is widely used for
compression strength determination of cement, concrete and rock.
Equipped with optional fixtures and measurement devices, it can be
used for concrete splitting tensile test and flexure test.
CS1, ASTM C39, AASHTO T22, GB/T 50081(Part 6)
This test method covers determination of compressive strength of
cylindrical concrete specimens such as molded cylinders and drilled
cores. It is limited to concrete having a unit weight in excess of
50 lb/ft3 [800 kg/m3].
The values stated in either inch-pound or SI units are to be
regarded separately as standard. The SI units are shown in
brackets. The values stated in each system may not be exact
equivalents; therefore, each system shall be used independently of
the other. Combining values from the two systems may
result in nonconformance with the standard.
1. The system can return automatically, the oil cylinder can return
the original position via manual or automatically after finishing
2. Imported encoder mounted on the seat is for position measurement
of piston with high accuracy
3. Imported servo valve provides high stability and reliability
WANCE DTC-500 digital controller offers high speed and closed loop
control of load, displacement and extension.
- Imported IC, more reliable
- Up to 1000Hz sampling frequency
- Up to 1000Hz closed loop control frequency
- 1/500000 resolution
- 16 digital input/output port
- Built-in port for PC communication
- Expandable ports
- Load protection, over-current protection, over-voltage protection,
over-speed protect, and over-travel protection.
TestPilot is designed to enhance your ability to perform accurate
and repeatable mechanical testing of materials, components and
finished goods across a full spectrum of applications. It provides
the simplicity and ease-of-operation needed for quick and efficient
quality assurance and quality control testing, the flexibility to
adapt readily to changing requirements, and the sophistication to
address unique or complex demands. The software’s intuitive
operator interface, powerful analysis and reporting, and growing
host of test methods make it an excellent foundation for
establishing and sustaining a truly global standardized testing
TestPilot software is fully compatible with all WANCE testing
machine series, with different modules for different type of tests.
This software features a large, growing host of pre-packaged test
methods to help you quickly and efficiently meet the requirements
of global test standards such as ASTM, ISO, DIN, EN, BS, and more.
Selected by an operator at runtime, these methods are crafted to
meet the specific test flow, analysis and reporting requirements of
industry standards across a range of specimen and test types.
Pre-packaged test methods are available in a wide selection of
bundled sets, including: Polymers & Plastics, Metals,
Construction Materials, Biomedical Products, paper Products,
adhesives, foam, textiles and more.
|Calibration accuracy||Class 1|
|Force range||1% ~ 100%FS|
|Frame structure||One body casting|
|Column spacing (mm)||460|
|Maximum compression space (mm)||320|
|Platen adjustment||Spacing block|
|Compression platens (mm)||Φ300|
|Actuator (piston) stroke (mm)||140|
|Actuator (piston) maximum up speed (mm/min)||90|
|Actuator (piston) maximum down speed (mm/min))||230|
|Force loading speed (kN/s)||0.02%~2%FS/s|
|Frame dimension (LxWxH) (mm)||600×410×1350|
|Power supply||3-phase 380VAC±10%|
|Power consumption (kw)||4|
|Hydraulic Power Unit dimension (LxWxH) (mm)||500×880×930|
|0il tank volume (L)||70|
|Total weight (kg)||2000|